SZNS SANS 10187-3: 2013 Load Securement of Vehicles Part 3: Metal Loads

Description

This part of SANS 10187 covers the safe securement and loading of metal loads on vehicles.

This part of SANS 10187 covers the following categories of metal load:

1. a) metal plate;
2. b) metal sheet in rolls or coils;
3. c) metal bars or billets;
4. d) long flexible sections;
5. e) large castings and fabricated units;
6. f) wire coils; and
7. g) scrap metal.

Contents                                                                                                                             Page

1 Scope…………………………………………………………………………………………………………………………………………………1

2 Normative references……………………………………………………………………………………………………………………..1

3 Definitions…………………………………………………………………………………………………………………………………………1

4 General Requirements………………………………………………………………………………………………………………….3

4.1 Tyre size designation …………………………………………………………………………………………………………………..3

4.2 Nominal section ………………………………………………………………………………………………………………………….4

4.3 Nominal rim diameter ……………………………………………………………….….……….………………………….4

4.4 Nominal aspect ratio……………………..…….………………….……………….…………………………………………5

4.5 Speed rating symbol markings…… …………………………………………….……………………………………..5

4.6 Load index number…………………………………….………… …………………………….……………………………..5

4.7 Regrooving……………….……………………….………………………………..…………….…………………………………5

5 Inspection and Test  ……..……………………………………………………………………………………………………….6

5.1 Visual inspection …………………………………..……………………………………………………………………………8

5.2 Measuring the section width and overall diameter ………………………………………..………………..9